Whatsapp

Whatsapp ID: +86 185 9582 9579

E-mail
WeChat

WeChat ID: +86 185 9582 9579

Telephone

Complete The Installation Of Tile Adhesive Production Line In Malaysia

Warmly celebrate the successful installation of a 15-ton tile adhesive production line from AIMIX in Malaysia In Feb 2022. Let’s learn more about this tile adhesive machine!

How did the customer find us?

The customer found our website through a Google search, and then read the product introduction, product diagram, product parameters, and case studies on our website, and was very interested in our 15 ton dry mix mortar plant, so he left us a message. Within a day, our salesman contacted the customer immediately.

AIMIX installed tile adhesive manufacturing plant in Malaysia

The customer’s initial purchase needs

After the initial communication, the customer wanted to buy a set of tile adhesive making machine with an output of 20 tons per hour. However, through our engineer’s analysis, combined with the total duration and productivity of the customer, we suggested that 15 tons dry mortar plant would be enough, and gave the customer a set of production plan, a detailed analysis of the output and the later revenue, the customer was very satisfied with our plan, so he decided to place an order.

15 ton tile adhesive manufacturing plant
15 ton tile adhesive manufacturing plant Malaysia

Customer evaluation

First of all, the customer is particularly satisfied with our website and likes our presentation very much, which clearly shows the types of products and application areas to the customer, so that the customer has a very clear perception of his project. The customer also marked that he appreciated the efforts of the AIMIX team.

Basic product information

The tile adhesive production line is very widely used, and the produced dry mortar can be applied to many places, such as masonry mortar, plastering mortar, interface agent, tile adhesive, caulking agent, interior and exterior wall putty, waterproof mortar, flooring mortar, self-leveling mortar, repair mortar, early strength mortar, powder foam coating, color decorative mortar, insulation mortar, non-shrink grout, dry mix concrete, etc. What you need to know before investing.

First of all, I think the most important point is the application of the end product, customers need to investigate before investing in the dry mortar production line to see if the local customers have a great demand for this product. The continuous demand of customers is the guarantee of the value of this equipment.

If you want to learn more about this tile adhesive production line, contact us now!

    Customize Your Solutions

    Contact us now via email: market@aimixgroup.com, or WhatsApp me, or fill in the form below.

    FEW TIPS:

    • Please describe the type of project (e.g., building house, factory, road, bridge, dam, airport, etc.).

    • Please list the specific equipment or type (e.g., crushing plant, asphalt plant, batching plant, self-loading mixer, concrete pump, etc.).

    • Please tell us your estimated equipment or project start-up date.

    • Please detail your specific requirements or expectations (e.g., project site, voltage, climate, etc.).

    • If you are interested in becoming our distributor, please let us know.

    Leave a Comment

    AIMIX Hot Products Are All Over The World

    AIMIX Hot Products Are All Over The World Map