Looking for a reliable concrete batching plant in Malaysia? AIMIX provides customized concrete solutions for residential projects, infrastructure construction, and ready-mix concrete production. With our Malaysia branch office located in Puchong, Selangor, we offer local consultation and project support for Malaysian customers. Our batching plants are operating successfully across Malaysia, including an AJ180 batching plant reference site in Kuching, Sarawak, where customers can learn more about our equipment performance through a real operating project.
| Project Requirement | Recommended Solution | Main Focus |
|---|---|---|
| Long-term concrete production at a fixed site | AJ Series | Stable stationary production |
| Faster plant installation and project startup | AJQ Series | Quick installation and flexible deployment |
| Concrete production and pumping at the same jobsite | AJP40 | Batching, mixing, and pumping in one unit |
| Projects requiring plant relocation | AJSY / AJY Series | Mobile concrete production |
Located in Kuching, Sarawak, Malaysia, this AJ180 stationary batching plant is an AIMIX customer reference site for ready-mix concrete production. The plant is operated by a local commercial concrete supplier, providing stable concrete supply for infrastructure, residential, and construction projects in the region.
To meet the customer’s increasing demand for ready-mix concrete production, AIMIX supplied an AJ180 belt-type stationary batching plant featuring high production capacity, accurate batching, and reliable long-term operation.
Key advantages include:
With installation guidance, commissioning assistance, and technical support from AIMIX Malaysia, the batching plant has been operating successfully and helping the customer improve production efficiency. This Kuching reference site is available for customer visits by appointment. Visitors can experience the equipment operation and learn how this batching solutions are applied in real ready-mix concrete production environments.
After the successful operation of the AJ180 plant, the customer purchased an AJ120 stationary batching plant for another project, demonstrating their continued trust in our equipment quality and service support.
Construction projects in Malaysia vary from urban development and commercial buildings to highways, bridges, and remote infrastructure projects. Based on different project durations, production requirements, and site conditions, contractors can choose between stationary and mobile concrete batching plants to ensure efficient concrete supply.
Stationary concrete batching plants for sale in Malaysia are designed for projects requiring continuous concrete production at fixed locations, including ready-mix concrete supply, infrastructure development, and long-term construction projects. They deliver stable capacity and reliable performance for contractors needing consistent concrete production throughout the project lifecycle.
AJQ Models: AJQ50, AJQ70, AJQ100, AJQ150
AJQ Series plants are designed for projects that require faster installation, shorter preparation time, and reliable concrete production.
Key Features:
Best Applications in Malaysia:
AJQ Series plants are suitable for Malaysian contractors who need to shorten plant installation and start concrete production sooner while maintaining stable production capacity.
Typical models: AJ-25, AJ-35, AJ-50, AJ-75
Hopper-type plants are compact systems designed for medium and small-scale concrete production where construction space is limited.
Key Features:
Best Applications in Malaysia:
Hopper-type plants are widely used in Malaysia, especially for urban and space-limited projects where contractors need a compact, economical batching solution with reliable production capacity.
Typical models: AJ-60, AJ-90, AJ-120, AJ-180, AJ-240
Belt-type plants are designed for large-scale continuous concrete production, providing high efficiency and stable performance for major construction projects.
Key Features:
Best Applications in Malaysia:
Belt-type stationary concrete plants are the preferred solution in Malaysia for projects requiring large-scale, stable, and continuous concrete production over extended construction periods.
As construction projects across Malaysia are often spread over multiple locations, mobile concrete batching plants offer the flexibility needed for efficient concrete production at different job sites. Our mobile batching plant range includes the AJSY, AJY, and AJZY series.
Model: AJP40
AJP40 is an integrated concrete plant that combines batching, mixing, and pumping in one machine for small and space-constrained construction projects.
Key Features:
Best Applications in Malaysia:
AJP40 is suitable for Malaysian contractors who need to produce and pump concrete directly at the jobsite without arranging separate batching, mixing, and pumping equipment.
Compact concrete batching plants are designed for space-limited sites, making them ideal for urban projects and small-scale construction. The popular AJSY40 model features simple operation with manual or semi-automatic control, while some higher-end models offer basic PLC systems. Remote control and touchscreen operation make daily use quick and intuitive.
Compact batching plants are well suited for urban construction projects across Malaysia, where limited jobsite space and flexible installation are important for improving construction efficiency.
AJY series mobile concrete batch plants provide excellent flexibility and rapid deployment, making them ideal for temporary construction sites, road projects, and contractors managing multiple locations. Our popular AJY60 and AJY90 models feature intelligent control systems that automate batching, weighing, mixing, and discharging with high accuracy (aggregates ±2%, cement/water ±1%). Remote monitoring and fault diagnosis help improve operational efficiency while reducing maintenance downtime.
Ideal for highway construction, municipal infrastructure, and projects across Peninsular Malaysia, Sabah, and Sarawak, where contractors need fast plant relocation and reliable concrete production at multiple job sites.
Popular models: AJZY-40, AJZY-60
AJZY mobile plants use a drum mixing system, making them a cost-effective solution for small-scale and low-to-medium grade concrete production.
Key Features:
Best Applications in Malaysia:
AJZY drum type mobile plants are widely used for small-scale construction projects across Malaysia, where compact design, easy transportation, and low operating costs are highly valued.
| Type | Belt Type | |||||
|---|---|---|---|---|---|---|
| Model | AJ60 | AJ90 | AJ120 | AJ180 | AJ240 | AJ270 |
| Theoretical productivity (m³/h) | 60 | 90 | 120 | 180 | 240 | 270 |
| Mixer discharge volume (L) | 1000 | 1500 | 2000 | 3000 | 4000 | 4500 |
| Mixer feeding volume (L) | 1500 | 2250 | 3000 | 4500 | 6000 | 6750 |
| Mixer power (kw) | 18.5×2 | 30×2 | 37×2 | 55×2 | 75×2 | 75×2 |
| Discharge height (m) | 4.1 | 4.1 | 4.2 | 4.2 | 4.2 | 4.2 |
| Aggregate bin configuration (number × single bin volume, m³) | 4×7 | 4×15 | 4×20 | 4×25 | 4×30 | 4×30 |
| Cycle time (s) | 60 | 60 | 60 | 60 | 60 | 60 |
| Maximum aggregate particle size (mm) | 80/100 | 80/100 | 80/100 | 80/100 | 80/100 | 80/100 |
| Cement silo (optional) | 2×100 | 3×100 | 4×100 | 4×100 | 4×100 | 4×100 |
| Aggregate weighing system | ±2% | ±2% | ±2% | ±2% | ±2% | ±2% |
| Powder weighing system | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
| Water weighing system | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
| Additive weighing system | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
| Installed power (kw) | ≈110 | ≈160 | ≈220 | ≈290 | ≈340 | ≈340 |
| Control mode | Fully automated computer (PC) control | |||||
| Power supply | 220V/415V/440V/380V, 50Hz/60Hz, three-phase | |||||
| Types | Hopper type | |||
|---|---|---|---|---|
| Model | AJ-25 | AJ-35 | AJ-50 | AJ-75 |
| Theoretical Productivity (m³/h) | 25 | 35 | 50 | 75 |
| Mixer Model (Mixer Output L) | JS500 | JS750 | JS1000 | JS1500 |
| Mixer Power (kW) | 18.5 | 30 | 2×18.5 | 2×30 |
| Mixing Cycle Period (s) | 72 | 72 | 72 | 72 |
| Max.Aggregate Size (mm) | Φ60 | Φ60 | Φ60 | Φ80 |
| Standard Aggregate Bin Capacity (m³) | 3×3 | 3×5 | 3×8 | 3×12 |
| Kind of Aggregate | 2/3 | 2/3/4 | 3/4 | 3/4 |
| Max. Discharging Height (m) | 3.8 | 4.1 | 4.1 | 4.1 |
| Overall Weight (ton) | ≈15 | ≈18 | ≈23 | ≈30 |
| Installation Power (kW) | ≈65 | ≈75 | ≈100 | ≈140 |
| Power Supply | 380V/220V/415/440V, 50/60HZ, 3Phase | |||
| Model | AJSY20 | AJSY40 | AJSY60 |
|---|---|---|---|
| Theoretical productivity (m³/h) | 20 | 40 | 60 |
| Mixer discharge volume (L) | 500 | 1000 | 1500 |
| Mixer feeding volume (L) | 750 | 1500 | 2250 |
| Mixer power (kw) | 18.5 | 18.5×2 | 30×2 |
| Discharge height (m) | 4.1 | 4.1 | 4.1 |
| Aggregate bin configuration (number × single bin volume, m³) | 2×4.5 | 2×4.5 | 2×4.5 |
| Cycle time (s) | 60 | 60 | 60 |
| Maximum aggregate particle size (mm) | 60/80 | 60/80 | 60/80 |
| Cement silo (optional) | 1×100 | 1×100 | 1×100 |
| Aggregate weighing system | ±2% | ±2% | ±2% |
| Powder weighing system | ±1% | ±1% | ±1% |
| Water weighing system | ±1% | ±1% | ±1% |
| Additive weighing system | ±1% | ±1% | ±1% |
| Installed power (kw) | ≈50 | ≈70 | ≈100 |
| Control mode | Buttons + Touch Screen + Remote Control | ||
| Power supply | 220V/415V/440V/380V, 50Hz/60Hz, three-phase | ||
| Model | AJY-60 | AJY-90 |
|---|---|---|
| Theoretical production efficiency (m3 /h) | 60 | 90 |
| Mixer discharge capacity (liter) | 1000 | 1500 |
| Mixer feeding capacity (liter) | 1600 | 2400 |
| Mixer motor power (kw) | 18.5×2 | 30×2 |
| Discharge height (m) | 4.1 | 4.1 |
| Aggregate storage capacity (m3) | 8×3 | 12×3 |
| Working cycle period (sec) | 60 | 60 |
| Maximum aggregate particle size (mm) | 80/100 | 80/100 |
| Cement silo (tons) (optional) | 100×1 | 100×2 |
| Aggregate weighing system precision | ±2% | ±2% |
| Accuracy of powder weighing system | ±1% | ±1% |
| Precision of water weighing system | ±1% | ±1% |
| Accuracy of additive weighing system | ±1% | ±1% |
| Installation power (kw) | ≈100 | ≈140 |
| Traction method | semi-trailer | semi-trailer |
| Control mode | computer control | computer control |
| Power supply | 220V/415V/440V/380V, 50Hz/60Hz, three-phase | |
| Parameter | Model | Unit | AJZY-40 | AJZY-60 |
|---|---|---|---|---|
| Theoretical production efficiency | Cubic meters per hour | 30-40 | 50-60 | |
| Drum mixer | -Kilowatts | JZM1000 | JZM1500 | |
| Motor power | kW | 7.5×2 | 11×2 | |
| Mixing time | second | 40 | 40 | |
| Discharge height | meters | 1.3 | 1.3 | |
| Batching machines | Dosing machine | -cubic meters | PLD1200 | PLD1600 |
| Hopper capacity | Cubic meters | 5×2/3 | 8×2/3 | |
| Motor power | kilowatt | 4×2 | 4×3 | |
| Sensor | kilogram | 2000×3 | 2000×3 | |
| Cylinder | - | 100×250 | 100×250 | |
| Belt size | millimeters | 10400×500×2; 4200×500×1 | 10400×500×2; 4200×500×1 | |
| 9000×600×1 | 9000×600×1 | |||
| Feeding height | millimeter | 3200 | 3200 | |
| Cement weighing system | Weighing precision | - | ±1% | ±1% |
| Water weighing system | Weighing accuracy | - | ±1% | ±1% |
| Pump power | Kilowatts | 3 | 3 | |
| Additive weighing system | Weighing accuracy | - | ±1% | ±1% |
| Additive pump power | Kilowatts | 1.1 | 1.1 | |
| Chassis | (Equipment) Size | millimeter | 8410×2000×780 | 11100×2000×780 |
| Tire size | millimeter | 1000 | 1000 | |
| Control systems | Electronic components | - | ZHENG TAI | ZHENG TAI |
| Control system | - | PLY1000 Semi-automatic control system | PLY1000 Semi-automatic control system |
From urban development in Klang Valley to infrastructure projects in Sabah and Sarawak, concrete batch plants play an important role in supporting Malaysia’s diverse construction needs. Different project environments require suitable concrete production solutions to ensure reliable supply, consistent quality, and efficient construction progress.
Concrete batching plants are widely used for highways, bridges, rail projects, and other public infrastructure developments in Malaysia. Projects such as road expansion, bridge construction, and transportation networks require continuous concrete supply to support large-scale construction activities.
With ongoing development in areas such as Kuala Lumpur, Selangor, Johor, and Penang, concrete plants are commonly applied in residential projects, commercial buildings, industrial parks, and manufacturing facilities. These projects require stable concrete production to support different construction stages.
In regions such as Sabah and Sarawak, some construction projects are located far from ready-mix concrete suppliers. Onsite concrete production solutions can help contractors maintain a reliable concrete supply for roads, infrastructure, and development projects in remote areas.
For industrial facilities, mining-related infrastructure, and energy projects, batching plants provide dependable concrete production support for foundations, structural works, and other construction requirements.
From commercial concrete suppliers to construction contractors, AIMIX has supported a wide range of concrete projects in Malaysia with reliable batching plant solutions. These cases showcase practical experience in different project environments, from large-scale RMC supply to remote construction sites.
To support the drainage construction along the Pan Borneo Highway in Sabah, the customer required a dependable concrete supply solution that could overcome remote site challenges and keep the project moving on schedule.
To meet the project requirements, AIMIX provided an AJ90 stationary concrete batch plant designed for stable concrete production at the jobsite. The solution helped the customer achieve:
Our engineers provided installation guidance, commissioning support, and operator training, helping the local team quickly start production.
After successful installation and commissioning, the AJ90 batching plant achieved stable trial production and was prepared for continuous operation. This project demonstrates how a properly configured batching plant can help contractors in Malaysia’s regional and infrastructure projects improve construction efficiency while maintaining quality and cost control.
For a bridge construction and roadbed paving project in Kuala Lumpur, maintaining a stable concrete supply was essential to ensure smooth progress. With limited onsite space and changing construction areas, the contractor needed a compact batching solution that could provide reliable production while adapting to different project stages.
Based on the project conditions, we provided an AJSY35 mobile concrete batch plant as a practical solution for the customer. Its compact structure and mobile design allowed the customer to establish concrete production at the jobsite while adapting to changing construction requirements.
The solution helped the customer achieve:
After commissioning, the AJSY35 batching plant provided stable concrete production for the project and helped the customer maintain construction progress according to schedule. This case demonstrates how compact batching plants can provide a suitable solution for Malaysian contractors working on infrastructure projects with space limitations and changing site conditions.
Coastal embankment construction requires reliable concrete supply, especially in remote areas. For this project in Lahad Datu, Sabah, limited site access, transportation challenges, and changing tidal conditions created difficulties for concrete delivery. The customer needed a reliable onsite production solution to maintain smooth construction progress.
To overcome the site limitations, we offered an AJY35 mobile concrete batching plant that enabled the customer to produce concrete directly at the construction location.
The solution helped the project team achieve:
Our service team also provided onsite installation guidance and operator training, helping the local team quickly understand plant operation and maintenance.
The AJY35 mobile batching plant successfully supported concrete production for the coastal defense project, helping the client make full use of available working periods and maintain construction progress. This project demonstrates how mobile plants can provide practical solutions for remote areas in Malaysia, especially locations where access, transportation, or site conditions make conventional concrete supply methods difficult.
Choosing the right batching plant in Malaysia depends on your project requirements, site conditions, and production needs.