Frequently Asked Questions

This page will show you some questions customers frequently asked. Mainly including a concrete batching plant, concrete pump, self-loading concrete mixer, and crusher plant, I will update new questions later, please be concerned.

Concrete Batching Plant

Q: How many tankers do you need to be equipped with a 25 cubic meter concrete batching plant? I have one myself.
A: Under normal circumstances, a 25 batching plant, equipped with 2 small square concrete transport trucks can basically meet the needs.

Q: How many shovels do you need to be equipped with an AJ-60-type concrete batching plant? I already have one myself.
A: Under normal circumstances, a production line of AJ-60 type concrete batching plant, a 50 shovel truck is basically enough.

Q: How many cement tanks does AJ-75 concrete plant need to be equipped with? How many are the minimum?
A: A standard configuration AJ-75 type mixing plant, generally equipped with 3 powder tanks is enough. Of course, according to the different situations of specific users, the number of their use can also be increased or decreased.

Q: Is concrete mixing machinery easy to install? Your manufacturer is not responsible
A: If it is stand-alone equipment, it is generally relatively simple, if it is a complete set of equipment, the manufacturer will arrange technicians to guide the installation and commissioning on-site, and carry out technical training such as equipment operation and maintenance.

Q: What engineering construction is JS750 concrete mixer suitable for? Where is the range of use suitable
A: This type of mixer is mainly used for the mixing and construction of ready-mixed concrete at some small construction sites, such as precast parts, township roads and other projects.

Q: How much KW is the main engine power used in the AJ-90 type concrete batching plant for 1500?
A: According to the calculation of the main machine JS1500 mixer, the mixing motor is 60KW. And generally for dual motor starting design.

Q: What kind of lifting method is used for the AJ-75 concrete batching plant? Is it a lifting bucket?
A: According to the relevant standards of the industry, AJ-75 type mixing plant adopts the feeding method of lifting bucket lifting.

Concrete Pump

Q: How Many Kinds of Concrete Pumps are for Sale in Aimix? and Capacities?
A: Three kinds of concrete pumps for sale: trailer concrete pump, concrete mixer pump, and boom concrete pump. Capacities are as follows:
Trailer pump: 30, 40, 60, 80, and 90 m3/h
Mixer pump: 30 and 40 m3/h
Boom pump: 14m, 21m, 30m, 34m, 37m, 44m, 47m, 50m, and 57m

Q: Do I Need to Install the Concrete Pump After Getting It?
A: No. There is no need for assembly and installation. We have exported it as a whole machine in the container.

Q: What Should I do After Receiving The Concrete Pump?
A: Before putting it into use, it is necessary to test the pump. Read the manual operations before operation.

Q: How Much is the Shipping Cost? Which seaport to deliver to?
A: It depends on the distance between the port of departure and the port of arrival. In general, Aimix would export the equipment from Qingdao or Guangzhou Port.

Q: How Should I Pay for the Concrete Pouring Pump? What are Payment Terms in Aimix?
A: Most payments are accepted in USD currency. The payment methods accepted for international concrete pump orders are:
30%T/T in advance, 70% T/T before delivery; LC

Q: What’s the manufacturing time of the concrete pump?
A: Less than one month production period

Q: What’s the Aimix delivery time of the concrete pump?
A: 15 working days after getting a 30% pre-payment

Q: What’s the warranty period for the concrete pump?
A: One-year warranty since receiving the concrete pump.

Q: Do You Supply Spare Parts?
A: Yes. In branch offices or warehouses, we have spare parts in stock. We will arrange for delivering our spare parts nearest and soonest.

Q: How to operate AIMIX concrete pump?
A: Checking the steps of operating the equipment through video here:
Operating the trailer pump: https://youtu.be/PV6LSARe_iY
Operation of concrete mixer pump: https://youtu.be/RHqwDWd-Ddg

Q: Does Aimix provide after-sales service for pumps?
A: Yes, Aimix provides after-sales service, including online training, and on-site installing, checking and maintaining service.

Q: Does Aimix provide an installation and operation manual for the pump?
A: Yes, we would provide the operation manual when exporting the concrete pump.

Self Loading Concrete Mixer

Q: What is the fuel consumption of each model of self-loading concrete mixer truck?
A: The average fuel consumption of AS-1.8 is 5.5 liters,
AS-2.6 is 6 liters;
AS-3.5 is 7.5 liters;
AS-4.0 is 8 liters.

Q: What is the filter element of a 2.4 square self-loading concrete mixer truck?
A: Model is: Air filter: YKW2036U12
Oil filter: GX0712B
Machine filter: JX1011

Q: When ordering a self-loading concrete transit mixer, I want to buy some accessories together, what do I need to buy, recommend it?
A: Filter element, boom cylinder, external hydraulic water pump, working duplex pump, tire, etc.

Q: Is your self-loading concrete mixer four-wheel steering?
A: The smaller models do not have four-wheel steering, but the 4-square and 6-party ones can do four-wheel steering.

Q: How to assemble your self-loading concrete mixer? How to conduct the training?
A: We have made a video that can show the assembly process in detail, and it only takes half a day to complete the assembly.

We have a video showing how to operate it, if you watch the video or can’t operate it, our engineers can provide online guidance, our after-sales staff is online 24 hours a day, and can reply to your questions at any time.

Q: If we buy this self-loading concrete mixer, how do the customs clearance?
A: We have a professional documentation team that will help you prepare the required customs clearance information, you can show it to the customs and pay the customs clearance fee.

If you do not want to do customs clearance, we have cooperative customs clearance agents in your country, and if necessary, we can introduce you to you.

Q: What is the length of the unloading chute of the self-loading concrete mixer truck? Can it be extended?
A: The chute of AS-1.2, AS-1.8, AS-2.6, AS-3.5C, and AS-4.0 is 1 meter, AS-3.5A, AS-3.5B is 1.7 meters,and AS-4.0A,AS-4.0B, and AS-4.0C is 70.

How long is the discharge chute you need? I will send you one under the application to the company.

Q: How to clean a self-loading concrete truck mixer?
A: The tank needs to be cleaned before each work, and can be equipped with a high-pressure car wash pump, or add two bucket stones and half a tank of water to stir for 3-5 minutes before pouring out.

Q: Can a self-loading concrete truck produce concrete according to the formula? Can I print production data?
A: The self-loading concrete truck is equipped with a hydraulic weighing system, available in English and Russian. You can weigh the appropriate material according to your recipe requirements. Equipped with a printer, the weight of the weighed material can be printed.

Q: What brand of tires for the self-loading concrete mixer do you have? Is quality guaranteed?
A: We use China’s marked brands Linglong and Qianjin, their reputation is very good, we have sold thousands of units, and there are no customer feedback quality problems.

Q: What kind of oil should be added to the engine? (synthetic or mineral)
A: Both can be used, but the synthesis is more expensive, and it takes a long time.

Crusher Plant

Q: What raw materials can the crusher machines process?
A: Jaw crusher: Commonly used for coarse crushing, suitable for processing various ores with compressive strength not higher than 320MPa, such as river pebbles, granite, basalt, iron ore, etc.
Cone crusher: It is suitable for processing materials with medium and high hardness, such as basalt, granite, river pebbles, iron ore, gold ore, etc.
Impact crusher: suitable for processing brittle materials with low hardness, such as limestone, calcite, concrete blocks, etc.

Q: How to choose a suitable crushing plant?
A: 1. Understand the properties of the material: such as the hardness, particle size, mud content, and water content of the material.

2. Clarify the requirements for the quality of finished products: such as the requirements for the particle size and shape of finished products.

3. According to the use of the finished product: projects with different uses have different requirements for sand and gravel aggregates, and the equipment needs to be reasonably configured according to the use of the finished product.

Q: When To Choose A Mobile Crushing Plant?
A: 1. When the project has the characteristics of small size and limited area. Because the mobile crusher plant has a small footprint and can be moved flexibly.
2. The construction environment is relatively harsh, and it is necessary to drive in the rugged road environment of the crushing site, and a mobile plant can be selected.
3. Projects that require processing materials at the quarry site. Choosing a mobile crusher plant can effectively reduce the cost of raw material transportation.

Q: What is the difference between a tire-mounted mobile crusher plant and a crawler mobile crusher plant?
A: Tire-type mobile crusher plant: it needs to rely on the semi-trailer head for traction. It has the characteristics of a short wheelbase and a small turning radius. It is not easy to damage the road surface and can be driven flexibly on ordinary roads and in the work area.
Crawler-type mobile crusher plant: It adopts self-hydraulic drive and uses crawler belts to realize in-situ steering. It can be operated by wireless remote control, and it is very easy to drive the crusher to the trailer and transport it to the job site.

Q: What is the difference between ore crushing and grinding?
A: During the processing of metal or non-metal ores, ore crushing and grinding are preparatory operations before selection.
In terms of crushing, large-scale crusher plants generally use coarse, medium, and fine three-stage crushing to gradually reduce the particle size of ore blocks to about 8-25 mm. Then it is sent to the grinding machine for grinding until the useful mineral particles can achieve monomer separation. Grinding is usually one or two stages, sometimes up to three stages.

Q: The use of common stones processed by the crusher plant
A: 1. River pebble: a high-quality sand-making raw material, which is the best choice to replace natural sand in terms of strength, grain shape, and color.
2. Quartz sand: It is a high-quality raw material for sand making, which can reach or even surpass natural sand in terms of strength and grain shape.
3. Limestone: In the gravel production line, it can be used as the raw material of sand and gravel at the same time, and the stone powder can also be reused, mostly used in wall and floor tiles.
4. Granite: Granite with high quartz content and low sulfide content is a high-quality raw material for sand making, but the problem of excessive powder must be solved.
5. Basalt: Sand made of basalt is mostly used in concrete, which can reduce the weight of concrete, but the structure is still very strong, and it has the characteristics of sound insulation and heat insulation. It is a good aggregate for lightweight concrete in high-rise buildings.

Q: What are the performance characteristics of VSI crusher
A: 1. The VSI crusher has the characteristics of low energy consumption, high output, and a large crushing ratio
2. It is small in size, and easy to install and maintain.
3. It has the function of shaping, the product is set up in a square shape, and the stacking density is high.
4. During the production process, the stone can form a protective bottom layer, reduce wear and prolong the service life.

Q: What are the relevant indicators of the finished product of the crushing plant?
A: 1. Total output: The total output is generally based on how many tons of stones are crushed per hour, that is, the expected production efficiency.
2. Grading requirements: Usually there are several specifications such as 0~5mm, 5~15mm, 15~25mm, 25~40mm, etc.
3. Granularity requirements: the percentages of needles and flakes allowed for products of various specifications.

Q: What are the relevant indicators of raw materials in the crushing plant?
A: Types of raw materials: What types of raw materials are processed, such as limestone, granite, basalt, construction waste, etc
Strength: that is, the compressive strength of the stone, which can be divided into extra-hard rock (250-160MPa), hard rock (160-100MPa), sub-hard rock (100-140MPa), and soft rock (<40MPa). Hardness: generally refers to Mohs hardness, which indicates the ability of minerals to resist external mechanical action. Moisture content: the general requirement is ≤2%, not more than 5%. Mud content: the general requirement is ≤1%, not more than 2%. Feeding size: chooses the appropriate crushing equipment, otherwise the wear parts are easy to wear. Feeding method: such as loading by wheel loader or direct feeding by truck. Q: What are the main uses of finished products of various specifications in the crushing plant? A: Below 100mm: used for laying the roadbed of railways and highways. 20-40mm: Mainly used for laying railway ballast, etc. 10-30mm: Mainly used in the production of asphalt, ordinary concrete, etc. 5-10mm: mainly used for laying highways, viaducts, etc. 0-5mm: mainly used in the production of aerated bricks, ceramics, machine-made sand, etc. Washed sand: mainly used in the production of concrete products, building decoration, interior decoration, and environmental greening. Q: How to install the crusher plant? AIMIX Group can provide customers with two installation methods: online installation and offline installation. A: Our after-sales team can provide 24-hour online installation service, and if customers need it, our engineers will go to the customer's site for installation guidance. Q: Can the planetary crusher plant be fully automatically controlled according to customer requirements? A: The planetary crusher plant does not need to be fully automatic because it is a continuous production. It only needs to follow the sequence of the hosts from the back to the front, and sustainable production can be achieved after manual start-up. Moreover, the power of the main engine of the large-scale crusher plant is relatively large, and the cost of fully automatic control is too high. However, the lubrication and hydraulic adjustment systems of some crusher machines are automatic during the production process.

AIMIX Hot Products Are All Over The World

AIMIX Hot Products Are All Over The World Map