“Thanks to AIMIX’s 80tph asphalt plant, our bridge project finally got back on track. The asphalt quality and production speed exceeded our expectations.” the project manager said excitedly. This is the feedback we received from the project team at Gyaing Zathapyin and Atran Bridges in Myanmar, two major milestones along the East-West Economic Corridor. These projects faced serious challenges early on due to a lack of suitable asphalt production equipment locally. Let’s explore how we stepped in and delivered a solution that not only met but exceeded expectations.
Understanding the Project Challenges and Urgent Needs
The client initially struggled because local suppliers could not meet their stringent requirements for modified asphalt. Temperature control had to be precise, and the material proportions had to stay consistent batch after batch. Without a high-performance asphalt plant, the project risked halting altogether. After hearing the client’s concerns, our team quickly scheduled a face-to-face technical consultation.
Specific Project Requirements
The Gyaing Zathapyin and Atran Bridges project highlighted several critical needs:
- Precise temperature control: Modified asphalt needed exact heat to ensure durability on heavy-traffic bridges.
- Reliable production: Continuous operation without frequent breakdowns was essential for the tight schedule.
- Ease of operation: Staff had different skill levels, so the asphalt mix plant had to be intuitive and flexible.
- Consistent material quality: Accurate weighing and mixing of aggregates and asphalt were non-negotiable.
These requirements demanded a machine with both advanced technology and robust durability. Our solution needed to deliver, not just on paper, but in the demanding reality of bridge construction under Southeast Asian conditions. Time was critical, and the solution had to be ready fast.
Customized Solution: ALQ-80 Stationary Asphalt Batch Plant
After careful planning, our expert team delivered the ALQ-80 model: an 80TPH stationary asphalt batch plant featuring cutting-edge temperature control technology. The asphalt plant integrates German Siemens PLC systems with infrared monitoring, ensuring the exact temperature for modified asphalt throughout production.
How ALQ-80 Matched the Project’s Demands
Here’s how why the ALQ-80 Stationary Asphalt Batch Plant was chosen and how it was directly addressed the project’s critical issues:
Precision Where It Counts
Modified asphalt must stay within a narrow temperature range to ensure durability on heavily trafficked bridges. ALQ-80’s Siemens PLC with infrared temperature monitoring maintained exact heat levels, giving the engineers confidence.
Keeping Production Flowing
Any stoppage meant lost time and money. The ALQ-80’s automated feeding, mixing, and discharge system kept asphalt flowing continuously. Predictive maintenance alerts helped the team prevent unexpected breakdowns before they happened.
Ease of Use for a Mixed Team
Operators had varying experience. ALQ-80’s flexible control modes—touch screen, computer, or manual buttons—allowed everyone to operate confidently, reducing stress and human error.
Consistent Material Quality
Bridges demand uniform asphalt. The asphalt plant’s precise weighing system ensured aggregate errors stayed within ±0.5% and asphalt/powder within ±0.25%, meaning each batch matched the last, with no guesswork.
Fewer Delays, More Efficiency
Enlarged cold aggregate bins meant operators didn’t have to stop production waiting for materials. Adjustable dust pipes allowed quick installation even in tight spaces, saving precious setup time.
Durable Design for Long Projects
Heavy-duty components like reinforced mixing blades and heated bins could handle millions of tons of asphalt without failure. This reliability meant the team could focus on the bridge, not the equipment.
| Model | ALQ80 |
|---|---|
| Capacity | 80 t/h |
| Cold Aggregate Hoppers | 4×7.5m³ |
| Dryer Size | φ1.5m×6.7m |
| Fuel consumption | 120-600kg / h |
| Vibrating Screen (Layer) | 4 layers |
| Mixer Capacity | 1000kg |
| Cycle Time | 45s |
| Filter Area | 420m² |
| Asphalt Temperature | 140-180 ℃ |
| Total Power | 300kw |
From Delivery to Production: Fast Installation That Kept the Project Moving
For the bridge project team, choosing the right asphalt plant was only half the battle. The next big concern was simple but critical: how fast could the plant be installed and start producing asphalt? Delays in installation would directly affect the construction schedule. That is why we sent a professional installation team to the site and worked closely with the client’s local engineers from day one.
Step-by-Step On-Site Support
Instead of leaving the client to handle installation alone, AIMIX provided full technical guidance throughout the process:
- Pre-installation planning: Before the equipment arrived, our engineers reviewed the site layout, power supply, and material storage areas to avoid surprises during assembly.
- Guided mechanical installation: Key components such as the dryer drum, mixer, and hot aggregate bins were installed under direct supervision, ensuring correct alignment and safety.
- Electrical system setup: Our team assisted with PLC wiring and control system configuration to guarantee stable and accurate plant operation.
- Commissioning and test runs: Multiple trial batches were produced to fine-tune temperature, weighing accuracy, and mixing cycles before full production began.
Thanks to this structured approach, the ALQ-80 asphalt batch plant moved from delivery to stable production in a short time. The project team avoided long learning curves and costly mistakes, allowing bridge construction to resume without further delay.
Project Results: Efficiency, Quality, Reliability
With the ALQ-80 in operation, the bridge project quickly regained its schedule. The asphalt plant’s automation and precision minimized downtime, while predictive maintenance reduced unexpected failures. The client reported consistent asphalt quality, even in high-traffic areas, which improved the long-term durability of the bridge.
Production efficiency increased significantly. Enlarged cold aggregate bins and automated feeding meant fewer interruptions and faster completion of batches. Therefore, the asphalt mixing plant’s flexible operation modes allowed the team to optimize workflow without retraining staff.
See the ALQ-80 Asphalt Plant in Action on the Yangon Bridge Site
For many contractors, seeing is believing. Photos show the equipment, but video shows performance, workflow, and real production capacity. That is why the client requested full video documentation once the plant started running. The footage captures the complete production process—from cold aggregate feeding and drying, to precise mixing and finished asphalt discharge. It also shows how smoothly operators manage the plant using the intelligent control system.
What the Video Demonstrates
- Stable continuous production: No frequent stops, no material congestion, just smooth batch-by-batch output.
- Accurate material weighing: The weighing system responds quickly and consistently, ensuring uniform mix quality.
- Operator-friendly control: Clear interface and simple commands make daily operation efficient and stress-free.
- Clean and organized site layout: Dust control and material flow remain well managed, even during peak production.
These videos not only helped the client verify plant performance, but also became useful references for training new operators and planning future projects. They provide real proof that ALQ-80 hot mix plant performs reliably in real construction environments, not just in factory tests.
Why Our Asphalt Plant is the Trusted Choice for Contractors
“For us, delivering reliable, high-performance asphalt plants is standard practice,” says Zhang Xiao, General Manager of AIMIX GROUP Southeast Asia. All in all, we don’t just supply equipment; we collaborate with clients to understand challenges, customize solutions, and ensure the asphalt plant works in real conditions from day one.
Across Southeast Asia and beyond, we empower contractors to execute infrastructure projects with confidence. Our asphalt batch mix plants combine technology, efficiency, and durability to meet the highest standards, even under demanding conditions.
Take Action and Secure Your Project Success
If your project requires precise asphalt production, reliable operation, and high efficiency, we have the customized solution. Therefore, contact us today to discover how our stationary asphalt batch plants can save time, reduce costs, and ensure consistent quality. Let us help your infrastructure projects succeed just like the Gyaing Zathapyin and Atran Bridges in Myanmar.
